catalog

Equipment of OJI Special

CAUTION !

The use of　these　equipment,the　remodeling are danger.
We, the sales shop ,the related company doesn't do total act of compensating.

Use in the self responsibility.

Even If you have feelings different from the product or the performance thinking by yourself, we cannot guarantee.
Also if you have some trouble, we cannot guarantee and no supports.

#About our remodeling.
Our main purposes are how to make remodel with safety, stability in our power.
And we are remodeling some motherboard as the professional.
Usually, We send back after remodeling which made by our hands.
But if you have some trouble, we cannot guarantee and no supports.

#About the kit.
We have some kit for the customer in order to get some parts without spend time and effort.

That has prepared simplicity manual how to remodel.
But you will have some risk, as only simplicity manual and needing high skill of electronics.
You need an advanced technical soldering skill to use this kit and to do remodeling.
You have to take off reeds of surface mount chips from a soldering pattern.
And you connect wires.
All of additional parts are getting on additional little boards with studs.
You have to make that little boards getting on some parts. And connect with soldering using tin coating copper wire.

If you don't want to have some trouble or a risk,
You had better not use that kit.
Because, we cannot support for you.

FAN plate Kit ( The tentative name )

2002/feb/28

The kit main unit　　　

For example>>> using P4DC6+ , fanadapter and this kit

Xeon heat sink silent FAN adapter Kit ( The tentative name ) (For SuperMicro P4DC6+)
The stillness sound fan adapter kit

(Patent pending ! )

Characteristic
6cm,25mm FAN of goods on the market can install the adapter with just fit.
It can possible to low noise level using silent FAN.
You can install that kit, only by the screwing-on without remodeling, and easily.
It is lightly and the simplicity, the design structure with one sheet of sheet metal made.
It is weight within 450 g of the standard of FAN of intel for Xeon.
(the condition installed 60mm*25mmFAN in the heat sink of 'P4DC6+'.)
It is not easy to rust, as It is used by processing a laser cutting steel sheet.
Strength is about 3 times compared with aluminum.
It suppresses the installation distortion of the fan to the utmost.

The kit main unit　　　　　　　　　　　　　　　　　　　　　　　The installation reference figure to the P4DC6 + attachment fan
　　　　

The specification
･ The weight
About 50 g
( It doesn't include a screw, a fan, a heat sink ).
･ The outward form size
65 mm of about 80 mm*20mm* ( It doesn't include a screw, a fan, a heat sink ).
･ The material CPCC ( The zinc plating steel sheet )
The laser precise sheet metal processing
･ The reference weight
The total　About 410 g
The heat sink ( P4DC6 + The attachment )　About 260 g
The SANYO Xeon native FAN(25mm)　About 80 g
Installation metal fitting P4DC6 +　　Attachment )　10g
Xeon heat sink FAN adapter Kit　About 60 g

Note 1)
As for the specification and so on.
It sometimes changes, not being in the previous announcement.

PowerAdapter
The compulsive CPU's core voltage and FSB setting adapter kit

(Patent pending ! )

The PowerAdapter is a adapter, to adjust CPU FSB and Core voltage without depending on compulsive setting which CPU's required

The features
1) The compulsive FSB setting is available.
You can set FSB as 66M/100M/133M, anything you want.

2) It is possible to change Vcore adjustable easily by the dial setting.
1.3V to 2.05V (by 0.05V interval)

Note
If the motherboard doesn't have various settings on onboard chips or electric circuits.
you can't change CPU core voltage and FSB, even you try to set any states.

If you set undesirable CPU voltage (particularly high voltage) it might
cause severe damage to the CPU and motherboard.

From my experiment indicates that the CPU, which is set on unexpecting state
of high voltage, would be broken in a few seconds.

This adapter can use to FCPGA PentiumIII and PPGA Celelon only.
New Pentium III Tualatin1.13G can use !.

How to buy the PowerAdapter.
It's only JAPAN.
But the PowerAdapter is selling in "USER'S SIDE".
"USER'S SIDE" is shop of computers in Japan.
http://www.users-side.co.jp/

PowerAdapter's price is \9,800.- in Japan.
The shop has mail order system.

this computer shop has two branches in USA,
These branches are located in Los Angeles and San Francisco.

http://www.users-side.com/
(877) 873-7774 (LOS)
(877) 732-5422 (SAN)

Please ask to "USER'S SIDE" about "Power Adapter"

PowerDDS
(The 1 Hz step variable frequency occurrence module kit)

The outline specification
1,Output frequency 1Hz to about 34MHz(1Hz stepping)

Note
The mother board frequency generator takeover indispensability.

That's power supplies from ATX Power supply. (5V)

ASUS A7M266 the magnificarion variable kit

ASUS A7M266
The remodeling kit

You need an advanced technical soldering skill to use this kit and to do remodeling.
You have to take off the surface mount chips from a soldering pattern, have to exchange that parts and add a binary switch.

The magnification variable takeover
The on board method
The binary switch 16 steps (x 5 - x12.5 )

The mother board frequency generator takeover kit
(14.318MHz timer only)

Note
You need an advanced technical soldering skill to use this kit and to do remodeling.
You have to take off reeds of surface mount chips from a soldering pattern.
And you connect wires.
All of additional parts are getting on additional little boards with studs.
You have to make that little boards getting on some parts. And connect with soldering using tin coating copper wire.
That's power supplies from motherboard.

1) If wanting to do FSB variably from outside, the timer frequency takeover is always necessary.
You are always necessary when using PowerDDS, too.

Becouse If you are doing the outside frequency variably without takeover,The watch on the personal computer, too, has changed at the same time and it isn't possible to do time measurement.

2)This kit can use a lot of mother boards.
for example
1,ASUS A7M266
2,ASUS CUSL2
3,ABIT BX133
4,ABIT BH6
5,EP8K7A

6,etc

3) If you want to do FSB variably from outside, you have to use PowerDDS.
If you don't want to use PowerDDS.
You have to change the crystal in order to change FSB setting without PowerDDS.
But this Kit has no crystal of exchanging.
Please get ready the other crystal for changing FSB by your self.

PowerVIO2
The variable power takeover adapter kit of 3.3 V.
It is usable in socket-A mother board and Intel mother borad.

The outline specification
1,The variableness output voltage about 3.3V to 5.5V
2,Output current 20A ( peak 24A)
3,The entry power AC100V ( It can used only in Japan )

The motherboard remodeling

menus
<for example>

Abit TH7 II　　(2002/Feb/13)
The remodeling

(1) The mother board frequency generator takeover
(14.318MHz timer only)

(2) Vcore variableness with variable resister, over 1.65V
(3) V Memory(RIMM memory's Voltage variableness with variable resister, over2.5V.

Epox EP-8KHA+　　(2002/Jan/25)
The remodeling

(1) The mother board frequency generator takeover
(14.318MHz timer only)

(2) Vcore variableness with variable resister, over 1.85V
(3) V Memory(DDR memory's Voltage variableness with variable resister, over 3V.

ASUS A7M266-D　　(2002/Jan/19)
The remodeling

(1) The mother board frequency generator takeover
(14.318MHz timer only)

(2) Vcore variableness with variable resister, over 1.85V
(3) V Memory(DDR memory's Voltage variableness with variable resister, over 3V.

menus
<for example>

Abit Abit KR7A-RAID　　(2001/Dec/26)

The remodeling

(1) The mother board frequency generator takeover
(14.318MHz timer only)

(2) Vcore variableness with variable resister, over 1.85V
(3) V Memory(DDR memory's Voltage variableness with variable resister, over 3.5V.
(4) V IO(IO Voltage variableness with variable resister, over 4.0V.